|
Post by Marc on Jan 1, 2008 16:49:41 GMT -5
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 1, 2008 17:06:11 GMT -5
Everything looks amazing Marc. I'm sure a lot of people will be thrilled that the shirts will be shipping out soon. The Revolver is fantastic. Best Wishes, John
|
|
|
Post by Mr. Fusion on Jan 1, 2008 22:33:24 GMT -5
Amazing stuff, Marc!
|
|
|
Post by GCR on Jan 2, 2008 0:40:20 GMT -5
|
|
JEEP
Treasure Seeker
Prof. Henry Jones Jr. Equipment Afficianado
Posts: 322
|
Post by JEEP on Jan 2, 2008 2:23:30 GMT -5
Niiiice! I love your work Kim Regards. Jakob
|
|
Indiana Sam
Temple Guard
Fortune and Glory kid.....Fortune and Glory...
Posts: 248
|
Post by Indiana Sam on Jan 2, 2008 2:41:33 GMT -5
I love that revolver! In the words of Will Smith in "Independence Day" "I HAVE GOT TO GET ME ONE UH DEESE" fantastic work on everything Kim.
|
|
|
Post by Marc on Jan 2, 2008 3:09:06 GMT -5
Thanks gents!!! I'm quite thrilled by Kim's work myself to be honest. Here's the link to the gun that was used: www.modelguns-worldwide.com/dirtyharry.htmOne big and ugly sumbitch from an Indyfan's point of view. Kim had to cut down the barrel, drill it open , replace the sight, remove the medallions from the plastic grips, color them gold and attach them to the scratchbuilt wooden grips, add some rivets that weren't there, file off the top and bottom of the barrel, remove the back sight, fill up the frame with metal plaster in that area, file down the hammer on the sides, round off the corners on the drum and then slightly distress the whole thing to look more authentic. I'm QUITE proud of the piece to be honest Oh, and the holster hugs the revolver ever so tightly and since this replica is the exact same size as the HE2, it proves that the size of the holster is spot on Regards, Marc
|
|
|
Post by Mr. Fusion on Jan 2, 2008 9:05:46 GMT -5
One big and ugly sumbitch from an Indyfan's point of view. Kim had to cut down the barrel, drill it open , replace the sight, remove the medallions from the plastic grips, color them gold and attach them to the scratchbuilt wooden grips, add some rivets that weren't there, file off the top and bottom of the barrel, remove the back sight, fill up the frame with metal plaster in that area, file down the hammer on the sides, round off the corners on the drum and then slightly distress the whole thing to look more authentic. I'm QUITE proud of the piece to be honest Holy God! That is a lot of work. Please excuse the blasphemy. Marc, I would be just as proud of it if it were mine. In fact, I truely envy you for this piece. Congrats! -Josh
|
|
|
Post by Marc on Jan 2, 2008 9:26:17 GMT -5
No blasphemy at all Josh! That IS a whole load full of of work and considering what the un-modified Magnum goes for plus the countless hours that Kim put into it, one could just have bought the real thing instead. Not over here though Since I currently don't have the time to make a license, this is the closest I could get... ummmm... well... I though perhaps(!!!) I could put something on top of them bullets and use the energy of the cap to actually make something leave the barrel Only for testing purposes of course, as everything else would be highly illegeal... Regards, Marc
|
|
|
Post by Marc on Jan 2, 2008 9:35:40 GMT -5
Update: I just stuffed a tooth pick into the hole in one of the bullets and fired it off (quite loud inside the bathroom ;D). That lil' piece of wood sure made its way through the room Not sure about the speed or energy it has, but I sure don't want have someone pointing at my eyes with it loaded like that... Regards, Marc
|
|
|
Post by GCR on Jan 2, 2008 10:19:40 GMT -5
Update: I just stuffed a tooth pick into the hole in one of the bullets and fired it off (quite loud inside the bathroom ;D). That lil' piece of wood sure made its way through the room Not sure about the speed or energy it has, but I sure don't want have someone pointing at my eyes with it loaded like that... Regards, Marc Better be careful Marc, or you might "shoot your eye out"!!! ;D Seriously though...that piece is so sweet! That has got to be the next best thing to having the real-deal. I am VERY envious...I don't have a replica OR the real thing (yet ). -GCR
|
|
|
Post by raider57 on Jan 2, 2008 16:55:51 GMT -5
Wow! Super piece , Marc. And to K... a fabulous conversion AND finish job! As others have said, that baby looks real! I'll bet it even has the "heft" of an actual gun. (The weight usually gives away the imitation guns.) You can't get more accurate than that.
|
|
K on the run
Trail Guide
-?Adventurebilt Leather Co.?- -? Handcrafted ?-
Posts: 63
|
Post by K on the run on Jan 5, 2008 19:12:26 GMT -5
Thanks guys. Marc caught me on this one I happened to say something like "Hey aint the 44 Mag. an N frame? I think I can make that in to a decent 1917 hand ejector." It was a fun project but very time consuming and I still have to make one for myself. Best regards, Kim
|
|
|
Post by lordxhelmetx on Jan 5, 2008 22:20:57 GMT -5
Wow Marc, looks pretty damn awesome. Well done, Indy, very well done indeed.
|
|
|
Post by pitfallharry on Jan 5, 2008 22:41:01 GMT -5
|
|
|
Post by Marc on Jan 6, 2008 12:35:29 GMT -5
You really wouldn't wanna know what that gun is worth right now. Trust me - ESPECIALLY considering you live in the U.S.! If you want gun from modelguns-worldwide, just send an e-mail to Jay. He's been EXTRAORDINARY helpfull to me and BOY I've been a pain in the bumm with constantly changing my order. Regards, Marc
|
|
|
Post by pagey on Jan 6, 2008 12:47:23 GMT -5
I can't believe Kim turned a Dirty Harry gun into an Indy gun! I used to have a metal replica S&W .44 Magnum when I was a kid. I wish i'd kept it now.
|
|